Home Insulation Services Tyler, TX
Our Services
Home Insulation Installers in Tyler, TX
At Lex Air East Texas, we understand the importance of a well-insulated home in maintaining comfort, reducing energy costs, and prolonging the lifespan of your HVAC system. Our home insulation services are designed to enhance the energy efficiency and comfort of your home, whether you’re looking to upgrade existing insulation or insulate a new construction project.
With years of experience and a commitment to quality craftsmanship, our team of skilled professionals is dedicated to providing tailored insulation solutions to meet your specific needs. From attic insulation to ductwork insulation and everything in between, trust Lex Air East Texas to keep your home cozy and energy-efficient year-round.
Contact us today at (903) 741-3144 to learn more about our comprehensive home insulation services and schedule a consultation with our experts.
What Is Home Insulation?
Home insulation refers to materials or techniques used to reduce heat transfer between the interior and exterior of a building. It helps maintain a comfortable indoor temperature while reducing energy consumption and costs by minimizing heat loss in cold weather and heat gain in hot weather. A proper insulation barrier can even help prevent mold growth in the home. Insulation materials can include fiberglass, cellulose, foam board, and spray foam, among others. Proper insulation is essential for energy efficiency and climate control in homes.
What Is Insulation Made Of?
Insulating material varies greatly depending on cost, effectiveness, and environmental impact. Choosing the right insulation for your home is an important decision – one that the experts at Lex Air East Texas are all too happy to help with.
Faced vs Unfaced Insulation
Faced and unfaced insulation refer to whether the insulation material has a vapor barrier or facing attached to it.
Faced Insulation: This type of insulation has a vapor barrier or facing material, typically made of paper or foil, attached to one side. The facing helps control moisture and acts as a barrier to prevent water vapor from passing through the insulation. It’s commonly used in areas where moisture control is important, such as in exterior walls and attics.
Unfaced Insulation: Unfaced insulation does not have a vapor barrier attached to it. It is typically used in areas where moisture control is less of a concern, such as interior walls or between floors. Unfaced insulation allows for more flexibility in installation and is often used when a separate vapor barrier is already present or when moisture is not expected to be a significant issue.
How Do We Install Insulation?
Insulation installation involves several steps to effectively minimize heat transfer and maximize energy efficiency in a building. Firstly, the area where insulation will be installed is prepared by clearing any obstacles and addressing moisture issues. Then, the insulation material is measured and cut to fit the space precisely, ensuring a snug fit without compression. Batt or roll insulation is commonly placed between studs, joists, or rafters, while loose-fill insulation may be blown or poured into cavities or attic spaces.
Once the insulation is positioned, it’s secured in place using staples, wire mesh, or other appropriate fasteners, taking care not to compress the material. Any gaps or seams in the insulation are sealed to prevent air leakage, which can diminish its effectiveness. This sealing process helps maintain the integrity of the insulation barrier and improves energy efficiency. We wear protective gear throughout the installation and take safety precautions, especially when handling materials like fiberglass or mineral wool.
For large projects like home insulation, it’s important to enlist the services of a professional. The home insulation experts at Lex Air East Texas have the knowledge and tools necessary to ensure proper installation and maximal performance and energy efficiency.
Does Insulation Keep Heat Out?
Yes. According to the Department of Energy, insulation works by slowing down the transfer of heat, whether it’s from outside to inside (in warmer climates) or inside to outside (in cooler climates). In hot weather, insulation helps keep the indoor spaces cooler by preventing heat flow into the home, thus reducing the need for excessive air conditioning and lowering energy costs.
How Much Insulation Do I Need?
The amount of insulation needed depends on factors like climate, building type, building size, and even building codes. When our insulation experts evaluate your home’s insulation needs, we consider the following factors.
- Climate: Colder climates typically require higher R-values to keep indoor spaces warm, while warmer climates may prioritize insulation to keep heat out.
- Building type: Different areas of a building may require different levels of insulation. For example, attics, walls, floors, and crawl spaces may each have specific insulation needs.
- Local building codes: Your local building codes will have specific requirements for insulation levels and R-values for your area.
- Energy efficiency goals: We will also consider your budget and energy efficiency goals when recommending the amount of insulation needed for your home.
Home Insulation Types
Each type of insulation material has its advantages and is suitable for different applications depending on factors such as insulation needs, budget, and environmental considerations. Consulting with the professionals at Lex Air East Texas can help you determine the best insulation material for your specific requirements.
Insulation Materials
Each type of insulation material has its advantages and is suitable for different applications depending on factors such as insulation needs, budget, and environmental considerations. Consulting with the team at Lex Air East Texas can help you determine the best insulation material for your specific project.
Typically made of fiberglass or mineral wool, roll insulation comes in pre-cut lengths or rolls. It’s commonly used in attics, walls, and floors and is relatively easy to install between studs, joists, or rafters.
This type of insulation consists of loose fibers or particles, such as fiberglass, cellulose, or mineral wool, blown into cavities or attic spaces using a specialized blowing machine. It’s ideal for filling irregular spaces and achieving uniform coverage.
Spray foam insulation is applied as a liquid that expands into a foam, filling cavities and gaps to create an air-sealed barrier. It provides excellent thermal resistance and is commonly used in walls, attics, and crawl spaces.
Similar to blown-in insulation, loose-fill insulation consists of small particles, such as fiberglass, cellulose, or mineral wool, that are poured or blown into cavities or attic spaces. It conforms well to irregular shapes and provides effective thermal insulation.
Fiberglass insulation is made from fine glass fibers and is available in batts, rolls, or loose-fill form. It’s lightweight, non-combustible, and commonly used in residential and commercial buildings.
Bubble wrap insulation consists of plastic bubbles sandwiched between layers of reflective material, such as aluminum foil. It’s often used as a radiant barrier to reflect heat away from a surface and is relatively inexpensive.
Cellulose insulation is made from recycled paper or wood fibers treated with fire-retardant chemicals. It’s environmentally friendly, effective at reducing air leaks, and commonly used in walls and attics.
Soundproof insulation, also known as acoustic insulation, is designed to reduce noise transmission between rooms or from external sources. Materials such as fiberglass, mineral wool, or foam panels are commonly used for soundproofing applications.
Wool insulation is made from natural wool fibers, often sourced from sheep or other animals. It’s environmentally friendly, naturally fire-resistant, and provides effective thermal and acoustic insulation.
Insulation Locations
Insulation is essential in various locations throughout a building to maintain comfort, air sealing, energy efficiency, and structural integrity.
Insulating the attic is crucial for preventing heat loss in the winter and heat gain in the summer. Common insulation materials include fiberglass batts, blown-in cellulose, or spray foam, which are installed between the attic floor joists or rafters.
Insulation materials such as fiberglass batts, foam boards, or blown-in insulation are installed between wall studs or in wall cavities during construction or renovation.
In addition to standard wall insulation, exterior wall insulation systems can be installed on the outside of the building’s exterior walls. These systems typically consist of rigid foam insulation boards covered with a weather-resistant finish.
While not typically considered traditional insulation, window insulation products such as weatherstripping, caulking, and window films help reduce air leakage and improve energy efficiency by sealing gaps around windows.
Insulating floors above unconditioned spaces such as crawl spaces or garages helps maintain consistent indoor temperatures and reduce energy costs. Insulation materials such as fiberglass batts or foam boards are installed between floor joists or under floor coverings.
Insulating ceilings in unconditioned spaces such as attics or crawl spaces helps prevent heat loss or gain through the roof. Insulation materials are installed between ceiling joists or rafters to create a thermal barrier.
Insulating HVAC ductwork helps prevent energy loss during air distribution and improves system efficiency. Insulation materials such as fiberglass duct wrap or foam board insulation are applied around air ducts to reduce heat transfer.
Insulating garage doors helps maintain more comfortable temperatures in attached garages and can reduce heat loss or gain in adjacent living spaces. Insulation kits or panels made of materials like foam board or reflective insulation can be installed on garage doors.
Insulating hot water pipes reduces heat loss and prevents pipes from freezing in cold climates. Pipe insulation materials such as foam sleeves or fiberglass wraps are applied around pipes to retain heat.
Insulating crawl spaces beneath the main floor of a building helps prevent moisture issues, improve indoor air quality, and reduce energy costs. Insulation materials are installed between floor joists or on crawl space walls.
Insulating basement walls or floors helps regulate indoor temperatures, prevent moisture intrusion, and reduce energy usage. Insulation materials such as rigid foam boards or spray foam are commonly used in basement insulation projects.
Mobile homes require insulation in walls, floors, and ceilings to maintain comfortable indoor temperatures and energy efficiency. Common insulation materials include fiberglass batts, foam board, or blown-in insulation.
Home Insulation Cost in Tyler
On average, homeowners spend between $2,000 and $10,000 total upgrading or insulating their home. This also works out to between $1.50 and $5.00 per square foot. Several factors impact the ultimate cost of home insulation, including the following.
- Type of insulation
- Size and complexity of area to be insulated
- Insulation R-values (higher R-values typically cost more)
- Labor costs
- Additional materials and equipment required
The best way to understand the approximate cost of your project is to speak with the team at Lex Air East Texas. Whether you’re looking to add insulation, fully insulate a new home, or replace old insulation, we’ve got you covered.
How Much Does Spray Foam Insulation Cost in Tyler?
The cost of spray foam insulation can vary depending on several factors, including the size of the area to be insulated, the thickness of the insulation required, the type of spray foam used (open-cell or closed-cell), and local market conditions.
On average, spray foam insulation costs between $1.00 to $3.00 per square foot for open-cell foam and $1.25 to $4.50 per square foot for closed-cell foam. However, prices can be higher or lower depending on factors such as the complexity of the installation, accessibility of the area, and labor rates.
Home Insulation Removal Services in Tyler
If you want to replace existing insulation with new insulation, we also offer home insulation removal services. Removal involves safely and effectively removing existing insulation materials from a building. Before beginning the removal process, we perform a thorough assessment of the existing insulation.
The area where insulation will be removed is prepared by clearing any obstacles, ensuring proper ventilation, and taking safety precautions. We wear protective gear such as gloves, goggles, and masks to minimize exposure to insulation fibers or particles.
Insulation removal techniques vary depending on the type of insulation and its location. Common methods include vacuuming, scraping, or cutting the insulation material from walls, attics, or crawl spaces. Specialized insulation removal equipment, such as insulation removal vacuums, may be used to efficiently extract the material.
Once the insulation has been removed, it is carefully collected and disposed of according to local regulations and environmental guidelines. Depending on the type of insulation material, it may be recycled, disposed of at a designated facility, or handled by professional waste management services.
After the insulation removal is complete, the area is thoroughly cleaned to remove any remaining debris or contaminants. Surfaces may be vacuumed, wiped down, or treated with disinfectants to ensure a clean and safe environment.
Depending on the reason for insulation removal (e.g., renovation, upgrade, damage), new insulation may be installed following the removal process. This may involve installing the same type of insulation material or upgrading to a more efficient option based on energy efficiency goals and building requirements.
Contact a Top Insulation Contractor in Tyler, TX
With our dedication to quality, expertise in HVAC systems, and commitment to customer satisfaction, Lex Air East Texas is your trusted partner for creating a more comfortable, energy-efficient home in Tyler, Texas, and the surrounding areas. Whether you’re looking to upgrade your existing insulation, insulate a new construction project, or need insulation removal services, our team of professionals is here to provide tailored solutions to meet your specific needs.
Call (903) 741-3144 or contact us via our website today to schedule a consultation with top insulation contractors and take the first step toward a more comfortable and efficient home with Lex Air East Texas.
Tyler’s AC Contractor Dedicated to Doing it The Right Way. Always.
For over a decade, Lex Air East Texas has been dedicated to providing high-quality and affordable HVAC services to the Tyler, TX, community.
We believe in doing things the right way, which has helped us get a reputation as one of the most effective AC companies in the Tyler, TX, area.
When a Lex East technician is at your home, you can always expect quality service–but you can also expect the kind of service you’d expect from a family-owned & operated business. We think that’s the right way to do business.
SCHEDULE YOUR FREE ESTIMATE
Special Financing Options Done Right
Air conditioners don’t always break down when it’s convenient. Lex Air East Texas offers a variety of options should you need them.
We accept most major credit cards for larger purchases and repairs, and we also have special financing options available to ensure you get the repairs you need when you need them.
View our financing options today, or call us to speak with a representative about how we may be able to help you.
*Subject to credit approval
The Lex East Difference
24/7 Emergency Service
If your heating & air conditioning system goes down in the middle of the night, you may actually be in trouble. That’s why we provide 24/7 emergency services.
Certified Technicians
Our Lex Air East Texas technicians are NATE-certified and dedicated to ensuring each of our clients is completely satisfied with their work.
Flat Rate Pricing
When you hire Lex Air East Texas, you can expect flat-rate and upfront pricing. We won’t surprise you with hidden fees or labor costs on your final bill.
Free Estimates
Our technicians provide free estimates on all work. We’re also available should you need a second opinion on a quote from another HVAC company.